LeeBoy 685D - Operator Station Controls

OPERATOR STATION
1
2
3
4
5
6
7
Figure 3-2. Operator Station
ITEM
NO.
CONTROL NAME FUNCTION
1 Steering Column Controls
Contains steering wheel, component indicator lights, and grader work
function levers.
2 PV485 Digital Controller Displays engine operating parameters, warnings and alerts.
3 Foot Brake Press on the foot brake to stop the grader.
4 Heat/AC Controls (Option)
If equipped with the cab option, this additional option contains controls for
the heat and air conditioner.
5
FNR (Forward/Neutral/
Reverse) Pedal
Step on the front part of the pedal to move forward; step on the rear part of
the pedal to move in reverse. The center position is NEUTRAL. The FNR
pedal must be in the neutral (center) position to start the engine.
6 Throttle
Use to increase and decrease engine speed (RPMs) when in gear (low or
high gear). Push lever forward to increase speed. Push lever rearward to
decrease speed.
7 Main Control Panel
Contains numerous machine component controls, including the ignition
switch, lights, park brake, gears, fan, and wipers.
3
Components
3-7LeeBoy 685D Motor Grader