Page 229
MegaRAID SAS Software User Guide Chapter 6: MegaRAID Storage Manager Overview and Installation
| Installing MegaRAID
Storage Manager
The SNMP-Util package includes the RPM’s net-snmp-libs, net-snmp-utils and
additional dependent RPM’s. Make sure that these RPM’s are installed from the
operating system media before you install the MSM.
6.4.2 Installing MegaRAID Storage
Manager Software on Microsoft
Windows
Follow these steps if you need to install MegaRAID Storage Manager software on a
system running Microsoft Windows Server 2003, Microsoft Windows XP, Microsoft
Windows Vista, or Microsoft Windows 7:
1. Insert the MegaRAID Storage Manager software installation CD in the CD-ROM
drive.
If necessary, find and double-click the setup.exe file to start the installation
program.
2. When the Welcome screen appears, click Next.
If MegaRAID Storage Manager software is already installed on this system, then an
upgraded installation occurs.
3. Read the screen text and select Modify, Repair, or Remove.
4. When the next screen appears, read and accept the user license, and click Next.
The Customer Information screen appears, as shown in Figure126.
Figure 126: Customer Information Screen
5. Enter your user name and organization name. In the bottom part of the screen,
select an installation option:
—If you select All users, any user with administrative privileges can use this
version of MegaRAID Storage Manager software to view or change storage
configurations.
—If you select Only for current user, the MegaRAID Storage Manager shortcuts
and associated icons will be available only to the user with this user name.
To Next Page
Loading...
Need help?
General