Front bays
Ma-
x.
Am-
bi-
ent
Te-
mp.
(at
sea
lev-
el)
Processor group
Heat
sink
Fan
type
Ma-
x.
GPU
Qty.
GPU
installation
slot (s)
35°C
A Perf Perf 1 1
25°C E (9654/9654P processors only) Perf Perf 1 1
• 10 x 2.5" SAS/SATA
• 8 x2.5'' SAS/SATA
• 6 x 2.5" SAS/SATA + 4 x
2.5" AnyBay
• 6 x 2.5" SAS/SATA + 2 x
2.5" AnyBay + 2 x 2.5"
NVMe
30°C B Perf Perf 3 1, 2, 3
35°C A Perf Perf 1 1
25°C E (9654/9654P processors only) Perf Perf 1 1
16-EDSFF 30°C
B Perf Perf 3 1, 2, 3
30°C A Perf Perf 1 1
25°C E (9654/9654P processors only) Perf Perf 1 1
• 4x2.5'' SAS/SATA
• 4x2.5'' NVMe
• 4 x 2.5'' AnyBay
35°C
A and B Perf Perf
3 1, 2, 3
25°C E (except 9654/9654P/9174F/9554/
9554P processors)
CL Perf 3 1, 2, 3
30°C E (except 9654/9654P processors) CL Perf 3 1, 2, 3
30°C E (9654/9654P processors only) Perf Perf 3 1, 2, 3
25°C E (9174F/9554/9554P processors only) Perf Perf 3 1, 2, 3
Sever models with PCIe/OCP adapters (≥ 100GB) installed
• AOC: active optical cables
• DAC: direct attach cables
The suggested slots for PCIe/OCP adapters (≥ 100GB) are 1, 2, 3 in the following conditions.
Note: Among 10 x 2.5" configurations, only 10 x 2.5" NVMe (Gen 4) supports closed loop heat sink. 10 x
2.5" AnyBay (Gen 4/ Gen 5) and 10 x 2.5" NVMe (Gen 5) do not support it.
Chapter 5. Hardware replacement procedures 57
To Next Page
Loading...
