Figure 77. Installing an add-on air baffle 2
• GPU adapter on riser 3 assembly
1. Connect cables from the riser 3 and GPU adapter to the system board assembly. See
Chapter 6 “Internal cable routing” on page 271.
2. Install the GPU air baffle.
3. Install riser 3 assembly. See
“Install a riser assembly” on page 166.
4. Open the blue latch on the GPU air baffle and fix the end of the GPU adapter. Then, close
the blue latch.
Step 5. (Optional) If a riser card is not installed with a GPU adapter, install a filler on the GPU air baffle.
Figure 78. Installing the GPU air baffle filler
116 ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
