Figure 442. Front/Middle backplane signal cable routing
Figure 443. Middle backplane power cable routing
From To From To
1 Backplane 1: SAS 0,
SAS 1
16i adapter
• Gen 4: C0
• Gen 3: C0C1
1 Backplane 5: PWR Riser 2: PWR1, PWR2
2
• Backplane 1: SAS 2
• Backplane 5: SAS
• Gen 4: C1
• Gen 3: C2C3
12 x 3.5" SAS/SATA + 8 x 2.5" NVMe
This topic provides cable routing information for the 12 x 3.5-inch SAS/SATA front backplane and two 4 x
2.5-inch NVMe middle backplanes.
•
“Onboard connectors” on page 427
• “16i RAID/HBA adapter” on page 429
Onboard connectors
This topic provides cable routing information for the 12 x 3.5-inch SAS/SATA front backplane and two 4 x
2.5-inch NVMe middle backplanes.
Front backplane cable routing
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 427
To Next Page
Loading...
