Figure 464. Cable routing to one 8i adapter
From To
1 Backplane 1: SAS 0
8i adapter
• Gen 4: C0
• Gen 3: C0C1
Front + rear backplanes: 12 x 3.5" SAS/SATA + 2 x 3.5"/4 x 3.5" SAS/SATA
This topic provides cable routing information for the front 12 x 3.5-inch SAS/SATA expander backplane with
a 2 x 3.5-inch/4 x 3.5-inch SAS/SATA rear drive backplane.
•
“12 x 3.5" SAS/SATA + 2 x 3.5" SAS/SATA” on page 439
• “12 x 3.5" SAS/SATA + 4 x 3.5" SAS/SATA” on page 440
12 x 3.5" SAS/SATA + 2 x 3.5" SAS/SATA
This topic provides cable routing information for the front 12 x 3.5-inch SAS/SATA expander backplane with
a 2 x 3.5-inch SAS/SATA rear drive backplane.
8i adapter
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 439