Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
BmyijyY0-lNvapM4fTV5Gf
.
Procedure
Step 1. From the front of the rack, pull the rails all the way out until they stop
Attention: You can only install the server successfully when the rails are fully extended.
Rack front
Figure 30. Pulling out the rails
Step 2. Carefully lift up the server with three people.
CAUTION:
Make sure two or three people are lifting the sever by holding the lift points
78
ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
