Lenze i55AE155F

Parameter Name / value range / [default seng] Info
0x2C63:001 PPI without movement: Execuon
•
Seng can only be changed if the inverter is inhibi-
ted.
•
From version 04.00
Starng performance (without or with pole posion idencaon before
the start).
0 Deacvated Do not execute a pole posion idencaon.
2 Aer each enable Execute a pole posion idencaon aer every inverter enable.
Motor control
Opmisaon of motor control
Pole posion idencaon without movement
192