Lenze i55AE155F

Parameter Name / value range / [default seng] Info
0x23B4:002
(P512.02)
Port sengs: Port 2
(Port sengs: Port 2)
•
From version 04.00
Set baud rate for the port 2.
0 Auto-Negoaon
1 10 Mbps
2 100 Mbps
5 10 Mbps/Half Duplex
6 10 Mbps/Full Duplex
7 100 Mbps/Half Duplex
8 100 Mbps/Full Duplex
0x23B5:001
(P513.01)
Acve port sengs: Port 1
(Act. port se.: Port 1)
•
Read only
•
From version 04.00
Display of the baud rate set for the port 1 in parameter 0x23B4:001
(P512.01).
0 Not connected
1 10 Mbps/Half Duplex
2 10 Mbps/Full Duplex
3 100 Mbps/Half Duplex
4 100 Mbps/Full Duplex
0x23B5:002
(P513.02)
Acve port sengs: Port 2
(Act. port se.: Port 2)
•
Read only
•
From version 04.00
Display of the baud rate set for the port 2 in parameter 0x23B4:002
(P512.02).
0 Not connected
1 10 Mbps/Half Duplex
2 10 Mbps/Full Duplex
3 100 Mbps/Half Duplex
4 100 Mbps/Full Duplex
Conguring the network
Modbus TCP
Baud rate seng
364