Lenze i950

6.3.3 Source of digital output 1
The signal for digital output 1 is selected via the Sour
ce for digital output 1 parameter.
40x5020:030
0x5020:030
(Source digital output 1)
Ready to switch on
Drive fault
Homing done
Positioning profile done
Brake release out
Signal from fieldbus
Dig out 1
Fig. 20: Selecon of "Digital output 1"
Parameter
Address Name / seng range / [default seng] Info
0x5020:030 Source of digital output 1 Signal selecon for the digital output 1.
0 Ready to switch on
1 Fault
2 Homing done
3 Prole done
4 Brake opened
5 Network signal
Technology applicaon (TA) basic sengs
Dening control sources
Sour
ce of digital output 1
79