Lenze i950

Address Name / seng range / [default seng] Info
0x10F3:001 History buer : Max. number of messages
•
R
ead only
Maximum number of messages that can be stored in the history buer
(from subindex 6).
0x10F3:002 History buer : Latest message
•
Read only
Subindex of the latest message.
0x10F3:003 History buer : Latest acknowledged message
0 ... [0] ... 255
Subindex of the latest message acknowledged by the EtherCAT master.
0x10F3:004 History buer : New acve message
•
Read only
TRUE if messages are available that have not been acknowledged yet by
the EtherCAT master.
0x10F3:005 History buer : Control bits
0 ... [0] ... 65535
Sengs for sending and saving of the messages.
16.2.6 Diagnoscs
The content of this secon is currently being processed.
16.2.6.1 LED status display
The content of this secon is currently being processed.
LED status display
Notes on the EtherCAT connecon status and the data transfer can be obtained via the LED
displa
ys "RUN" and "L/A" at the RJ45 sockets.
16.2.6.2 Informaon on the network
The content of this secon is currently being processed.
The following parameters show informaon on the network.
Parameter
Address Name / seng range / [default seng] Info
0x2020:001 EoE informaon: Virtual MAC address
•
R
ead only
Display of the virtual MAC address.
0x2020:002 EoE informaon: IP adress
•
Read only
Display of the IP address.
0x2020:003 EoE informaon: Subnet mask
•
Read only
Display of the subnet mask.
0x2020:004 EoE informaon: Standard gateway
•
Read only
Display of the standard gateway.
0x2020:005 EoE informaon: DNS server
•
Read only
Display of the DNS server.
0x2020:006 EoE informaon: DNS name
•
Read only
Display of the DNS name.
0x2020:007 EoE informaon: Received packages
0 ... [
] ... 4294967295
Display of the packages received during the EoE transmission.
0x2020:008 EoE informaon: Transmied packages
0 ... [] ... 4294967295
Display of the packages sent during the EoE transmission.
16.2.6.3 EtherCAT master diagnoscs
Parameter
Address Name / seng range / [default seng] Info
0x5851:001 EtherCAT master diagnosis: EtherCAT master state
•
R
ead only
Display of the EtherCAT master state.
0 Unknown
1 Init
2 Pre-Operaonal
3 Bootstrap
4 Safe-Operaonal
8 Operaonal
Conguring the network
E
therCAT
Monitoring
341