Lenze i950

6.3.4 Source of monitoring signal
A monitoring signal can be selected for control word 6 and control word 7.
The source for the monitoring signal to be output is selected via the Sour
ce for monitoring
signal parameter. The number of decimal posions transferred depends on the value selected.
•
Selecon for the control word 6: 40x5050:006
•
Selecon for the control word 7: 40x5050:007
The source for the monitoring signal to be output is selected via the Source for monitoring
signal parameter. The number of decimal posions transferred depends on the value selected.
0x5030:006
0x5050:006
(Source monitoring signal 1)
None
Actual motor temperature
Actual motor current
DC bus voltage
Thermal load device
Thermal load motor
Analog input
Actual dancer position
Speed limit master
0x5050:116
(Monitoring signal 1)
Fig. 21: Selecon of digital output
0x5050:007
(Source monitoring signal 2)
None
Actual motor temperature
Actual motor current
DC bus voltage
Thermal load device
Thermal load motor
Analog input
Actual dancer position
Speed limit master
0x5050:117
(Monitoring signal 2)
Fig. 22: Selecon of digital output
Parameter
Address Name / seng range / [default seng] Info
0x5050:006 Display value 1 Signal selecon for monitoring signal 1 for status word 6.
0 None
1 Actual motor temperature
2 Actual motor current
3 DC-bus voltage
4 Device ulisaon
5 Motor ulisaon
6 Analog input 1
7 Actual dancer posion
8 Master speed limit
0x5050:007 Display value 2 Signal selecon for monitoring signal 2 for status word 7.
0 None
1 Actual motor temperature
2 Actual motor current
3 DC-bus voltage
4 Device ulisaon
5 Motor ulisaon Signal selecon for monitoring signal 2 for status word 7.
6 Analog input 1
7 Actual dancer posion
8 Master speed limit
0x5050:116 Display value 1
0 ... [0] ... 4294967295
0x5050:117 Display value 2
0 ... [0] ... 4294967295
Technology applicaon (TA) basic sengs
Dening control sources
Sour
ce of monitoring signal
80