Lexmark C910 - Cyan Printhead Error

Diagnostic Information 2-13
5055-01X
932 - Cyan Printhead Error
Step
Questions /
Actions
Yes No
1 Check to ensure
that the cables
between the LED
printhead and the
printhead
controller board as
well as the cables
between the
printhead
controller board
and the printer
controller board
are properly
connected. Are
they properly
connected?
Go to step 2. Properly connect the
cables.
2 Is fuse 3 on the
printhead control
board open?
Replace the
printhead control
board, cables
(CL13, CL24), and
LED printhead.
Replace the
printhead controller
board and go to step
3.
3 Did replacement of
the printhead
controller board
correct the
problem?
Problem solved. Replace the printer
controller board.