Lexmark C910 Service Manual

General Information 1-23
5055-01X
Network Connections
Internal Network Connections
• Lexmark MarkNet N2000 Series Internal Print Servers
– MarkNet N2000t for Token-Ring attachment
– MarkNet N2001e for Ethernet 10BaseT/100BaseTX
– MarkNet N2002e for Ethernet 10BaseT/10Base2
• Lexmark MarkNet N2003 Series Internal Fiber Print Servers,
including:
– MarkNet N2003fx SC
– MarkNet N2003fx MTRJ
External Network Connections
• MarkNet X2000 Series External Print Servers
– MarkNet X2011e (1-port) for Ethernet 10BaseT/100BaseTX
– MarkNet X2012e (1-port) for Ethernet 10BaseT/100BaseTX,
10BaseT/10Base2
– MarkNet X2031e (3-port) for Ethernet 10BaseT/100BaseTX
– MarkNet X2030t (3-port) for Token-Ring attachment
Standard Ethernet and MarkNet Compatibility
The standard Ethernet connection, MarkNet N2000 series and
MarkNet N2003 series internal and MarkNet X2000 series external
print servers support NetPnP 7.0 or later on Windows NT 4.0,
Windows 2000 and Windows XP systems.
The Ethernet and Token-Ring print servers and the standard
Ethernet connection support the following protocols:
• TCP/IP
• Novell (IPX/SPX including NetWare Directory Services)
• AppleTalk™
• LexLink (DLC/LLC)
The TCP/IP standard set of application services is supported,
including DHCP, WINS, SNMP (industry standard printer MIB), http,
lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following
protocols are also supported:

Lexmark C910 Specifications

General

Brand	Lexmark
Model	C910
Category	Printer
Language	English