Diagnostic Aids 3-3
5055-01X
Operator Panel Buttons
Button Function
Go Press Go to:
• Exit printer menus and return the printer to the ready state.
• Clear certain messages from the display.
If you’ve changed printer settings from the operator panel
menus, press Go before you send a job to print.
Menu Press Menu:
• Enter the menus from the
ready state.
• Scroll to the next (
Menu>) or the previous (<Menu) menu,
menu item, or value.
• Increase or decrease a numerical value for a menu item
setting.
• Display the Job Menu or the Supplies Menu while the printer is
busy.
Select Press
Select to:
• Select the menu shown on the second line of the display and
view the available menu items.
• Select the menu item shown on the second line of the display
and view the available values and the current user default
setting for that menu item.
• Save the value displayed on the second line of the display as
the new user default setting.
• Clear certain messages from the display.
Return Press
Return to back up to the previous level of the menu
structure without selecting a new menu item or value.
Stop Press Stop when the printer displays the Busy or Waiting
message to temporarily stop all activity. The message
Not Ready
is then displayed until you press
Go to continue printer activity.
For example, if you need to load paper in a tray while a job is
printing, press
Stop and wait for the printer motors to idle before
removing the tray from the printer. Reinsert the loaded tray, and
then press
Go.
To Next Page
Loading...
Need help?
General
