General Information 1-31
5055-01X
Tools
The removal and adjustment procedures require the following tools
and equipment:
• Magnetic tip Phillips screwdrivers, large and small
• Flat-blade screwdrivers
• Analog volt ohmmeter (a digital volt ohmmeter may also be
used)
• Needle nose pliers
• Tweezers, C-ring pliers
• Magnifier (20 times or higher)
• 6-angle wrench (1.5 mm)
When you make voltage readings, always use frame ground unless
another ground is specified.
To Next Page
Loading...
Need help?
General
