Lexmark C910 Service Manual

1-22 Service Manual
5055-01X
position is the upper left corner. The Finisher can support up to
1,100 sheets of unstapled, unpunched media. For stapled
media, the output bin supports up to 30 stapled sets or 1,000
sheets. The stapler can staple a maximum of 30 sheets per set.
Each C910 can support one Finisher.
• C910 Printer Cabinet - is customer installable and attaches
below the printer - printer sits on top of the printer stand. The
printer cabinet raises the printer to the correct height for use
with the optional finisher and high-capacity feeder. The printer
cabinet and high-capacity feeder can be installed concurrently.
• Printer Base - is customer installable and attaches below the
printer - printer sits on top of the printer base. If used with two
optional 550-sheet drawers, the printer base raises the printer
to the correct height for use with the optional finisher and high-
capacity feeder. The printer base and high-capacity feeder can
be installed concurrently.
– C910 -3 optional drawers
– C910n and C910dn -2 optional drawers
Connectivity
Standard
• Lexmark C910
– Bidirectional parallel and USB
• Lexmark C910n and Lexmark C910dn
– 10/100BaseTX Ethernet and USB
Optional Internal Local Connections
• Tri-Port Adapter (RS-232/RS-422 Serial, LocalTalkTM and
Infrared)
• RS-232C Serial/Parallel-C Interface Card
Note: USB is supported only under Windows 98, Windows Me,
Windows XP, Windows 2000 operating systems, Sun's Sun Ray
appliances running Sun Ray Server code version 1.2 or later, Sun
Blade workstations and Apple Macintosh iMac computer with
Operating System 8.6 or higher. A USB cable is included with this
card.

Lexmark C910 Specifications

General

Brand	Lexmark
Model	C910
Category	Printer
Language	English