4-18 Service Manual
5055-01X
Paper Feed Roller Removal
1. Remove the front cover.
2. Remove the manual paper feed tray.
3. Remove the right side cover and turn guide.
4. Remove the upper cassette.
5. Release the clutch until the paper feed roller screws are visible.
Turn the paper feed roller, and remove the screws from the
roller.
6. Remove the paper feed roller from the shaft.
Note: If the paper feed roller surface is stained with oil or other
contaminants, clean it with cloth moistened with alcohol.
Paper Carrying Roller Removal
1. Open the turn guide.
2. Remove the two screws from the paper carrying roller, and slide
the bearing forward.
To Next Page
Loading...
