Diagnostic Information 2-39
5055-01X
Close Side
Door
The printer side door is open. Close the printer side door.
If the error cannot be reset,
go to “Map 1 - False “Side
Door Open” Message”
on page 2-57.
Close Front
Door
The printer front door is open. Close the printer top door
and front door. If the error
cannot be reset go to
“Map 2 - False “Close
Front Door” Message”
on page 2-57.
Close Tray <x>
Top Cover
The high capacity feeder door
is open.
Close the HCF door and
the top cover. If the error
cannot be reset, go to
“Map 3 - False “Close
Tray (X) Top Cover”
Message” on page 2-58.
Copying The printer is processing a
copy job originating from the
OptraImage
TM
scanner.
Wait for the message to
clear.
Defragmenting The printer is defragmenting
the flash memory to reclaim
storage space occupied by
deleted resources.
Wait for the message to
clear.
Warning: Do not turn the
printer off while this
message is displayed.
Delete All Jobs The printer is requesting
confirmation to delete all held
jobs.
• Press Go to continue.
The printer deletes all
held jobs.
• Press Stop to cancel the
operation.
Deleting Jobs The printer is deleting one or
more held jobs.
Wait for the message to
clear.
Disabling
Menus
The printer is responding to a
request to disable the menus.
Wait for the message to
clear.
Note: While the menus are
disabled, you cannot
change the printer settings
from the operator panel.
Message Meaning Action
To Next Page
Loading...
