General Information 1-17
5055-01X
Envelopes
Sulfite, Wood-free - up to 100%
cotton
20 to 28 lb. bond
6,7,8
(75 to 105 g/m
2
)
Finisher Bin 1
3,4
Paper
Xerographic or business paper
16 to 28 lb. bond (60 to 105 g/m
2
)
Specialty papers
Glossy laser
1
80 lb. book (32 lb. bond) (120 g/m
2
)
Card stock - upper limit
Index Bristol
90 lb. index (44 lb. bond) (165 g/m
2
)
Transparencies
Laser printer type
2
47 lb. bond (175 g/m
2
)
Labels - upper limit
Paper
48 lb. bond (180 g/m
2
)
Finisher Bin 2
3, 4, 5
Paper
Xerographic or business paper
16 to 28 lb. bond (60 to 105 g/m
2
)
1
Part numbers 12A5950 (letter) and 12A5951 (A4)
2
Part numbers 12A5940 (letter) and 12A5941 (A4)
3
The duplex option supports the same weights and types as the printer,
except for transparencies, envelopes, labels and paper less than 75 g/m
2
(20 lb. bond) or greater than 105 g/m
2
(29 lb. bond)
4
Bin 1 represents engine side output and Finisher Bin 1 (face-up)
5
Finisher supports hole punch, job offset and stapling.
6
Finisher only supports long-edge fed envelopes wider than 5.8 in. (148
mm) - feed direction dimension
7
100% cotton content maximum weight is 90 g/m
2
(24 lb. bond)
8
105 g/m
2
(28 lb. bond) envelopes are limited to 25% cotton content
Media Weight
To Next Page
Loading...
