Lexmark MS310 4514-220 - Imaging Unit Low [84.Xy]; Imaging Unit Nearly Low [84.Xy]; Imaging Unit very Low [84.Xy]; Non-Lexmark Imaging Unit, See Users Guide [33.Xy]

Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, press on the printer control panel to continue
printing.
Imaging unit nearly low [84.xy]
Press on the printer control panel, if necessary, to continue printing.
Imaging unit very low [84.xy]
You may need to replace the imaging unit very soon. If necessary, press on the printer control panel
to continue printing.
Non-Lexmark imaging unit, see User’s Guide [33.xy]
The printer has detected a non‑Lexmark supply or part installed in the printer. Your Lexmark printer is
designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may
aect
the performance, reliability, or life of the printer and its imaging components.
Warning—Potential Damage: Use of third-party supplies or parts can aect warranty coverage.
Damage caused by the use of third-party supplies or parts is not covered by the warranty.
All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable
results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or associated components.
To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, press
and simultaneously for at least four seconds to clear the light sequence.
Replace imaging unit, 0 estimated pages remain [84.xy]
Replace the imaging unit. For more information, see the instruction sheet that came with the supply.
Reinstall missing or unresponsive imaging unit [31.xy]
Try one or more of the following:
• Remove the imaging unit, and then reinstall it.
• Remove the imaging unit, and then install a new one. For more information, see the instruction sheet
that came with the supply.
Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one. For more information, see the instruction sheet
that came with the supply.
4514-2xx
Diagnostics and troubleshooting
110