History Mode
Available options:
• Modified—The printer records any 976 error in the crash log and then resets without showing the error on
the control panel. The error appears on the control panel only when a significant amount of errors occur on
consecutive boots.
• Every Time—The 976 error appears on the control panel every time it occurs.
Configuration menu
The Configuration menu group consists of menus, settings, and operations that are used to configure a printer
for operation.
Entering the Configuration menu
1 Turn
o
the printer.
2 Open the front access cover.
3 Press and hold .
4 Turn on the printer.
5 Release the button after 10 seconds.
Print Configuration Menu Instruction Sheet
This prints a page that contains:
• Instructions on how to navigate through the Configuration menu settings
• The order of the Configuration menu settings, the LED pattern that represents each setting, the current
value of each setting, and the possible values of each setting
Restore Base
Warning—Potential Damage: This operation cannot be undone.
This restores all non-critical base device NVRAM settings to their factory default settings.
Restore STD NET
Warning—Potential Damage: This operation cannot be undone.
This restores all network NVRAM settings. The printer immediately performs a POR and restores the appropriate
settings to their factory default values. This option is available only on models with an integrated network
adapter.
4514-2xx
Service menus
164
To Next Page
Loading...
Need help?
General
