Lexmark MS310 4514-220 - Insufficient Memory to Collate Job [37]; Insufficient Memory to Support Resource Save Feature [35]; Memory Full [38]; Complex Page, some Data May Not Have Printed [39]

Insucient memory to collate job [37]
Try one or more of the following:
• From the printer control panel, press to print the portion of the job already stored and begin
collating the rest of the print job.
• From the printer control panel, press to cancel the print job.
Insucient memory to support Resource Save feature [35]
Press on the printer control panel to clear the light sequence.
The job will be printed without using Resource Save.
Memory full [38]
Try one or more of the following:
• From the printer control panel, press to continue printing. A data loss will occur.
• From the printer control panel, press to cancel the print job.
• Install additional printer memory.
• Decrease the resolution setting.
Complex page, some data may not have printed [39]
Try one or more of the following:
• From the printer control panel, press to continue printing. A data loss may occur.
• From the printer control panel, press to cancel the print job.
• Install additional printer memory.
• Reduce the number and size of fonts, the number and complexity of images, and the number of pages
in the print job.
Too many trays attached [58]
Do the following:
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet.
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top
to the bottom.
3 Remove the extra tray or trays.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
4514-2xx
Diagnostics and troubleshooting
114