Load media
Try one or more of the following:
• Load the tray or feeder with the correct size and type of paper.
• From the printer control panel, press to continue printing.
Note: If the printer
finds
a tray that has the correct size and type of paper, then it feeds from that
tray. If the printer cannot
find
a tray that has the correct size and type of paper, then it prints from the
default paper source.
• From the printer control panel, press to cancel the print job.
Remove paper from standard output bin
Do the following:
1 Remove the paper stack from the standard output bin.
2 From the printer control panel, press to continue printing.
Network [x] software error [54]
Try one or more of the following:
• From the printer control panel, press to continue printing.
• Unplug the router, then wait for 30 seconds, and then plug the router back again.
• Turn o the printer, wait for about 10 seconds, and then turn the printer back on.
• Update the network firmware in the printer or print server. For more information, contact customer
support.
Standard network software error [54]
Try one or more of the following:
• From the printer control panel, press to continue printing.
• Turn o the printer, and then turn it back on.
• Update the network firmware in the printer or on the print server. For more information, contact
customer support.
4514-2xx
Diagnostics and troubleshooting
112
To Next Page
Loading...
