To print a demo file:
1 Activate Demo mode and then POR the printer.
2 Press to print the first demo job.
3 After the last page of the previous demo job has been printed, press to print the next demo job.
Auto CR after LF
This is used to select whether or not the printer automatically performs a carriage return after a line feed control
command. The Auto CR after LF is common to both the PPDS and PCL emulations. When the setting is changed,
it is changed for both emulations.
Available options:
• O
• On
Auto LF after CR
This is used to select whether or not the printer automatically performs a line feed after a carriage return control
command. The Auto LF after CR is common to both the PPDS and PCL emulations. When the setting is changed,
it is changed for both emulations.
Available options:
•
O
• On
Energy Conserve
This aects the values that appear in the Power saver setting in General settings menu.
Available options:
• O—The Power saver menu displays a Disabled setting. When selected, it disables the Power saver feature.
• On—Disabled does not appear in the Power saver menu. The user cannot disable the Power saver feature.
Wipe All Settings
This makes any sensitive information that may exist on the volatile or non-volatile storage of the device
completely indecipherable. When selected, the printer performs a non‑critical NVRAM reset and then reboots.
Font Density
This creates microscopic holes in all black text. The holes save toner by reducing overlapping toner.
Available options: 1 to 5
4514-2xx
Service menus
166
To Next Page
Loading...
