Lexmark MS310 4514-220 User Manual

Actions Yes No
Step 8
Reseat the connections.
Does the problem remain?
Go to step 9. The problem is
solved.
Step 9
Note: Poor electrical contact to the photoconductor is the most
likely source of a full page background defect.
a Remove any contamination from the photoconductor charge
contact (C) on the right side of the frame.
C
b Perform a print test.
Does the problem remain?
Go to step 10. The problem is
solved.
Step 10
Check if the photoconductor charge contact is bent, damaged, or
not in proper contact with the imaging unit.
Is the contact free from damage and in proper contact with the
imaging unit?
Go to step 11. Contact the next
level of support.
Step 11
Replace the power supply. See
“Power supply removal” on
page 239.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Blank pages check
4514-2xx
Diagnostics and troubleshooting
47

Lexmark MS310 4514-220 Specifications

General

Print Technology	Monochrome Laser
Print Speed (Black)	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Recommended Monthly Page Volume	500 - 2, 500 pages
Connectivity	USB 2.0, Ethernet
Paper Output Capacity	150-sheet output bin
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Memory	128 MB
Maximum Duty Cycle	50, 000 pages per month
Paper Input Capacity	250 sheets
Media Sizes Supported	A4, A5, A6, JIS B5, Executive, Legal, Letter
Duplex Printing	Yes (Automatic)