Lexmark MS310 4514-220 - Page 51

Actions Yes No
Step 10
Replace the cable.
Does the problem remain?
Go to step 11. The problem is
solved.
Step 11
a Check the transfer roller for proper installation. If necessary,
remove and then reinstall the transfer roller.
b Check the transfer roller for contamination and damage.
Is the transfer roller free of contamination and damage?
Go to step 13. Go to step 12.
Step 12
Replace the transfer roller. See
“Transfer roll removal” on
page 218.
Does the problem remain?
Go to step 13. The problem is
solved.
Step 13
Check the transfer roller left contact spring on the transfer roller
left arm for damage.
Is the contact spring free of damage?
Go to step 15. Go to step 14.
Step 14
Replace the transfer roller left arm with cable.
Does the problem remain?
Go to step 15. The problem is
solved.
4514-2xx
Diagnostics and troubleshooting
51