UMX-TPS-TX100 series – User's Manual 83
M 0 0 0 B
Unlocked,
Muted
0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1
Reserved Reserved Reserved Reserved Reserved Reserved No signal Connected
The Most Common Received Port Status Responses
T000A
T 0 0 0 A
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0
Reserved Reserved Reserved Reserved Reserved Reserved No signal Not connected
T000B
T 0 0 0 B
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1
Reserved Reserved Reserved Reserved Reserved Reserved No signal Connected
T000F
T 0 0 0 F
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1
Reserved Reserved Reserved Reserved Reserved Reserved Signal presents Connected
Only for Phoenix audio port: Character 5 is C (11 00) which means signal is present but the cable connection
status is unknown. The explanation is Phoenix connector has no pin which can indicate the connection
status so this is always unknown.
T000C
T 0 0 0 C
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0
Reserved Reserved Reserved Reserved Reserved Reserved Signal presents Unknown
Command and Response
Î
Í <out1_state>
the next 2-byte long HEX code showing the current state of the output port.
Example
Î
Í
Legend
See at previous section.
Example and Explanation
T 0 0 0 F
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1
Reserved Reserved Reserved Reserved Reserved Reserved
Signal
presents
Connected
Command and Response
Î
Í <in>
Example
Î
Í
I5 input port is connected to the output port.
Switching Audio Input
Command and Response
Î <in>:<out>)
Í
Example
Î
Í
To Next Page
Loading...
