Lightware UMX-TPS-TX100 Series - Mute Audio Output; Unmute Audio Output; Lock Output; Unlock Output

 UMX-TPS-TX100 series – User's Manual 86
Mute Audio Output
Command and Response
Î <out>)
Í 
Example
Î 
Í 
Unmute Audio Output
Command and Response
Î <out>)
Í 
Example
Î 
Í 
Lock Output
Command and Response
Î <out>)
Í 
Example
Î 
Í 
Unlock Output
Command and Response
Î <out>)
Í 
Example
Î 
Í 
Analog Audio Input Level Settings
Volume
Command and Response
Î <in>.Volume=<level>
Í <in>.Volume=<level>
Parameters
<level> Sets the input volume (attenuation) between -95.625 dB and 0 dB in step of -0.375 dB. The
value is rounded up if necessary to match with the step value.
Example
Î 
Í 
Balance
Command and Response
Î <in>.Balance=<level>
Í <in>.Balance=<level>
Parameters
<level> Sets the balance; 0 means left balance, 100 means right balance, step is 1. Center is 50
(default).
Example
Î 
Í 
Explanation




