Lightware UMX-TPS-TX100 Series - Query the Validity of a Dynamic EDID; Query the Preferred Resolution of an User EDID; Emulating an EDID to an Input Port; Emulating an EDID to All Input Ports

 UMX-TPS-TX100 series – User's Manual 97

Command and Response
Î <dynamic>.Validity
Í <dynamic>.Validity=<logical_value>
Parameters
The <logical_value> can be true or false.
Example
Î 
Í 

Command and Response
Î <user>.PreferredResolution
Í <user>.PreferredResolution=<resolution>
Example
Î 
Í 
Emulating an EDID to an Input Port
Command and Response
Î <dynamicuserfactory>:<emulated>)
Í 
Example
Î 
Í 
Emulating an EDID to All Input Ports
Command and Response
Î <dynamicuserfactory>)
Í 
Example
Î 
Í 
Copy an EDID to User Memory
Command and Response
Î <dynamicemulatedfactoryuser>:<user>)
Í 
Example
Î 
Í 
The EDID of the last connected sink of D1 (Output 1) has been copied to U1.
Deleting an EDID from User Memory
Command and Response
Î <user>)
Í 
Example
Î 
Í 
Resetting the Emulated EDIDs
Command and Response
Î 
Í 
Example
Î 
Í 
Calling this method switches all emulated EDIDs to factory default one. See the table in the Factory EDID List
section.



