Lightware UMX-TPS-TX100 Series

5. Software Control - Lightware Device Controller UMX-TPS-TX100 series – User's Manual 60
Settings Menu
Status
Status tab in Settings menu
The most important hardware and software related information can be found on this tab: hardware and

be changed to unique description by the Set button.
Built-in Miniweb
The built-in website of the transmitter allows to connect and query status information of the transmitter via
a web browser.
▪            

▪ 
ATTENTION! Please be sure that the computer is in the same network as the extender. If the computer

will have to know the IP address for the one that is used for controlling the extender.
Choose le button. Clicking on the Reset button

Clicking on the Open miniweb button opens the built-in miniweb in the default web browser application.
Network
Network tab in Settings menu
IP address and DHCP settings can be set on this tab. Always press the Apply settings button to save changes.
Factory defaults settings can be recalled with a dedicated button.
Backup
Details about this function can be found in the  section.



