Lightware UMX-TPS-TX100 Series

1. Introduction UMX-TPS-TX100 series – User's Manual 7
1
Introduction

chapter we would like to introduce the device highlighting the most important
features in the below listed sections:
Model Denomination
UMX-TPS-TX140-Plus
HDBaseT
TM
TPS extender
Number of
outputs
Universal input interfaces -
analog and digital signals
are also accepted
Transmitter Number of inputs
Advanced
control features
WP-UMX-TPS-TX130-US-Plus White
HDBaseT
TM
TPS extender
Number
of
outputs
The device can
be mounted into
B225R outlet box
Universal input
interfaces -
analog and digital
signals are also accepted
Transmitter Advanced
control
features
Number
of inputs
Wallplate
The color
of the
enclosure
FP-UMX-TPS-TX130
HDBaseT
TM
TPS extender
Number
of
outputs
Universal input interfaces -
analog and digital signals
are also accepted
Transmitter Number
of inputs
Floorplate
Description
This transmitter was designed to extend digital and analog video
signals (e.g. VGA, DVI 1.0, HDMI 1.4 and DP 1.1) and audio signals
(analog stereo audio from local inputs or embedded 7.1 HBR audio).
Video signals with HDCP encryption are also supported. Analog
signals (both audio and video) are converted to digital format and
the audio signals can be de-embedded from the video. Thus, many

Using the factory, custom or transparent EDID emulation the user

Management forces the required resolution from any video source

The unit offers bi-directional and transparent IR, RS-232 and Ethernet
transmission. Furthermore, the IR and RS-232 connection support
command injection, allowing it to send any IR or RS-232 control
command directly from the LAN connection.
Remote powering (Power over Ethernet) is available through a single
CAT cable, but local power supply can also be used. UMX-TPS
transmitter can be mounted on a rack shelf or used standalone while
       
  
with both the HDBaseT
TM
extenders and matrix switchers.
Compatible Devices
The transmitter is compatible with other Lightware TPS receivers,
matrix TPS and TPS2 boards, 25G TPS2 boards, as well as third-party
HDBaseT extenders, displays, but not compatible with the phased out
TPS-90 extenders.
The transmitter is compatible
with any third-party HDBaseT
TM
device.
HDBaseT
TM
and the HDBaseT Alliance logo are trademarks of the
HDBaseT Alliance.
Î 
Î 
Î 
Î 
Î 
Î 
Î 



