4.11.1 Linear V/F Pattern Operation
4.11.2 Square Reduction V/F Pattern Operation
4.11.3 User V/F Pattern Operation
4.12 Torque Boost
4.12.1 Manual Torque Boost
4.12.2 Auto Torque Boost
4.13 Motor Output Voltage Adjustment
4.14 Start Mode Setting
4.14.1 Accelerating Start
4.14.2 DC Braking After Start
4.14.3 Initial Excitation of Stop Status (Pre-excite)
4.15 Stop Mode Setting
4.15.1 Deceleration Stop
4.15.2 DC Braking After Stop
4.15.3 Free Run Stop
4.15.4 Power Braking
4.16 Frequency Limit
4.16.1 Frequency Limit Using Maximum Frequency and Start Frequency
4.16.2 Frequency Limit Using Upper and Lower Limit Frequency Values
4.16.3 Frequency Jump
4.17 2
nd
Operation Mode
4.18 Multi-Function Input Terminal Control
4.19 Fire Mode Operation
5 Learning Advanced Features
5.1 Operating with Auxiliary References
5.2 Jog Operation
5.2.1 Jog Operation 1-Forward
5.2.2 Jog Operation 2-Fwd/Rev Jog by Multi-Function Terminal
5.3 Up-down Operation
5.4 3-Wire Operation
5.5 Safe Operation mode
5.6 Dwell Operation
To Next Page
Loading...
