Chapter 7: Quantitative Measurements (LIA...) LB 9507
7-8
L17
08: NO. OF DECIMAL (0-3) 2
LAST DISPLAY
Enter the desired number of decimal places for the calculated
concentration in all printouts and press <enter>.
L18
08: NO. OF CONTROLS (0-10) 2
LAST DISPLAY
Enter the number of control samples used for the measurements
(0 to 10) and press <enter>.
L19
08: CONTROL 1 ID
LAST DISPLAY
Enter an alphanumeric designation for the 1st control sample (so
you can remember it later when performing the measurement,
since the name is displayed on the LCD) and press <enter>.
L20
08: CONTROL 2 ID
LAST DISPLAY
Enter a name for the 2nd control sample, and subsequently all the
other controls you have defined.
L21
08: CONTROL 1 LOW LIMIT 0.00
LAST DISPLAY
Enter the lower limit for the 1st control (digits corresponding to the
format defined in L17) and press <enter>.
L22
08: CONTROL 1 HIGH LIMIT 16.00
LAST DISPLAY
Enter the upper limit for the 1st control sample and press <enter>.
To Next Page
Loading...