MacDon R113 - Page 54

214713 46 Revision A
1014929
A
B
C
D
Figure 3.91: Transport Swing Control
13. Install hose (A) from outer port (rod end) on transport
cylinder block to tee fitting (D) in port D of transport
swing control.
14. Install hose (B) from inner port (base end) on transport
cylinder block to tee fitting (C) in port C of transport
swing control.
1022691
A
B
C
Figure 3.92: Selector Valve Supply
15. Connect hose (B) with red collar #2, from the rear of the
hitch, to fitting in port A1 on selector valve (C).
16. Connect hose (A) with blue collar #2, from the rear of
the hitch, to fitting in port A2 of the selector valve (C).
17. Secure hoses (A) and (B) together with cable tie.
ASSEMBLING THE DISC MOWER (WITH OR WITHOUT THE DEALER-INSTALLED TRANSPORT)