Manitowoc 2250 - Page 177

Reference Only
Manitowoc Published 06-24-16, Control # 241-01 4-15
2250 OPERATOR MANUAL SETUP AND INSTALLATION
4
STORED POSITION
When the adapter
frame is attached
Pin Outer Hole in Cab
Support Beam Here
Pin Cab
Platform Here
Pin Inner Hole in Cab
Support Beam Here
Unclamp Cab
Support Beam Here
Clamp Cab
Platform Here
Store Pin
Here
Pin Outer Hole in Cab
Support Beam Here
Clamp Cab Support
Beam Here
Clamp Cab
Platform Here
Store Pin
Here
Clamp Cab Support
Beam Here
Pin Outer Hole in Cab
Support Beam Here
STORED POSITION
(when adapter frame is
not attached)
INTERMEDIATE POSITION
(for mounting/dismounting)
Adapter Frame
Pin Cab
Platform Here
Disengage
Clamp
Disengage
Pin
Engage
Pin
Engage
Clamp
OPERATING POSITION
A445
(see View A)
(see View B)
View B
View A
(typical 2 places)
OPERATOR’S CAB POSITIONS
Tie-Down
Strap
CAUTION
Equipment Damage!
Ensure the clamp does not interfere with the cab when the
cab is swung to the stored position. “The windows will
break”.
FIGURE 4-9