Driving
5.2 Operating the transmission
5 - 30 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
5.2.4 Selecting the driving direction
The following conditions must be met:
– The vehicle engine is running at idling speed,
– The accelerator is not being operated
– The parking brake or holding brake is applied to secure the truck crane.
For forward travel
• Press the button (3) once.
A suitable starting gear (1) is selected and displayed, e.g. gear 1.
Additionally, the highest gear (2) which is selected during driving is
displayed. You can change this gear;
à p. 5 - 32.
G
Risk of accidents from unexpected movement!
If the engine speed is too high when selecting the driving direction, then no
gear will be engaged. However, if the engine speed briefly drops low
enough, then the gear will be engaged and the truck crane will begin to
move, e.g. when you release the accelerator.
G
Risk of accidents if brakes not applied!
If the brakes are not applied, the truck crane moves immediately once the
driving direction has been selected. Therefore, always apply the parking
brake or the holding brake to secure the truck crane before selecting the
driving direction.
To Next Page
Loading...
Need help?
General
