EasyManua.ls Logo

Manitowoc Grove GMK6300L-1

Manitowoc Grove GMK6300L-1
1004 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Malfunctions in driving mode
7.3 Towing the truck crane
7 - 6 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
7.3.1 Towing after engine/transmission damage
The following information only applies to towing the truck crane out of the
immediate hazard area in the event of damage to the engine or transmission.
Compressed-air
supply
If the engine fails, the truck crane must be supplied with compressed air by
the tractor-vehicle so that the brake system is still operable.
Connect the filler connection (1) with the
supply coupling head of the towing vehicle.
A supply pressure of at least 6 bar (87 psi)
must be displayed and the lamps (2) must not
light up in the driver's cab when towing.
S
Risk of accidents and damage when towing the truck crane long distances!
Tow the truck crane at a maximum speed of 10 km/h (6 mph) and over a
distance of max. 1 km (0,62 mi). Additional measures must be taken for
longer distances, refer to Manitowoc Crane Care.

Table of Contents

Other manuals for Manitowoc Grove GMK6300L-1

Related product manuals