Operating elements for crane operation
9.2 Short description of the operating elements
9 - 114 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
9.2.23 Hand-held control
Sockets for
hand-held control
The following applies to all sockets:
Released operations
– Pull plug: Engine off – ignition off
– Insert plug: Switch the ignition on
à p. 12 - 21
1 – Emergency operation for crane
movements (except for telescoping
mechanism)
– Derrick lattice extension
1)
2 – Emergency operation for crane
movements
– Derrick lattice extension
1)
– Rigging the auxiliary hoist
1)
Lattice extension – luffing jib
To Next Page
Loading...
