Starting/switching off the engine – for crane operation
10.1 Starting the engine – from the crane cab
Operating Manual GMK6300L 3 112 xxx en 10 - 1
xx.xx.xxxx
10 Starting/switching off the engine – for crane
operation
10.1 Starting the engine – from the crane cab
This section describes only how to start the engine from the crane cab.
You can also start the engine with the hand-held control;
à p. 10 - 19.
10.1.1 CHECKLIST: Starting the engine
H
This checklist is not a complete operating manual. There are accompanying
instructions, which are indicated by cross-references.
Observe the warnings and safety instructions there!
1. Check whether the valve on the hydraulic tank is open;
à p. 10 - 7.
2. Check the coolant level in the engine;
à Maintenance Manual.
3. Check the oil level in the hydraulic system;
à Maintenance Manual.
s
To Next Page
Loading...
Need help?
General
