Driving modes
6.6 Installing/removing the supporting box
6 - 76 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
6.6.6 Disconnecting/establishing the hydraulic connection
The hydraulic connection between the supporting box and carrier consists
of two hoses with couplings.
Always close off hoses or connections you do not need with appropriate
caps.
Separating the connection
• Remove the hoses (2) from the connec-
tions (1).
• Place the hoses in the clamp (3).
Establishing the connection
• Remove the hoses (2) from the holder (3).
• Connect the hoses to the connections (1).
The assignment is defined by the size.
To Next Page
Loading...
