Driving
5.3 Driving the truck crane and switching it off
5 - 48 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
5.3.6 Warning submenu
ECOS differentiates between warning messages and error messages (error
messages;
à Error submenu, p. 5 - 54). A warning message indicates that
certain values do not correspond to a target value.
Further warning messages can be displayed on the instrument panel;
à p. 5 - 51.
When a warning message occurs:
– The lamps (1) and (3) flash,
– The display (2) shows the red symbol for the
pending warning message.
For more information
• Press button (4) once – the Warning
submenu opens.
The warning message has been acknowl-
edged – the lamp (3) lights up (no longer
flashes).
Meaning of
the symbols
The colour of the symbols indicates whether a warning message is active in
the corresponding area.
– Symbol grey – no warning message.
– Symbol red – warning message.
If a symbol is displayed in red, perform the following checks.
S
Risk of damage if warning messages are disregarded!
Observe the following information in good time and take the appropriate
remedial measures if a warning message appears. This prevents these
malfunctions causing defects in the truck crane.
To Next Page
Loading...
