Driving
5.3 Driving the truck crane and switching it off
Operating Manual GMK6300L 3 112 xxx en 5 - 53
xx.xx.xxxx
5.3.8 Override torque reduction
When the carbamide supply is empty, the torque reduction is activated via
the engine control system.
You can override torque reduction up to 3 times.
– If the carbamide level drops to the reserve level, the lamp (1) lights up.
– If the carbamide supply is used up, the lights (1) and (2) will light up.
– If lamp (1) flashes, the engine torque is reduced the next time the engine
is started.
The engine torque is reduced.
• Press button (1) down to override torque reduction.
You can override torque reduction up to 3 times.
The symbol (1) is displayed.
• Refill with carbamide immediately; à Carbamide, p. 4 - 8.
After the next engine start the torque reduction is deactivated.
The symbol (1) disappears.
To Next Page
Loading...
