Rigging work
12.6 Outriggers
Operating Manual GMK6300L 3 112 xxx en 12 - 29
xx.xx.xxxx
12.6.2 CHECKLIST: Retracting the outriggers
H
This checklist is not a complete operating manual. There are accompanying
instructions, which are indicated by cross-references.
Observe the warnings and safety instructions there!
1. Retract the outrigger cylinders as far as possible;
à p. 12 - 41.
2. Move the outrigger pads into the driving position and secure them;
à Moving into driving position, p. 12 - 39.
3. Fully retract and secure all outrigger beams;
à Permissible outrigger spans, p. 12 - 30,
à For on-road driving, p. 12 - 34,
à Extending/retracting outrigger beams, p. 12 - 35.
4. Stow away packing material safely, if applicable.
5. Activate the suspension (release locking).
The symbol (1) must be green (suspension on);
à p. 5 - 18.
s
To Next Page
Loading...
Need help?
General
