Rigging work
12.6 Outriggers
Operating Manual GMK6300L 3 112 xxx en 12 - 27
xx.xx.xxxx
12.6 Outriggers
12.6.1 CHECKLIST: Extending the outriggers
H
This checklist is not a complete operating manual. There are accompanying
instructions, which are indicated by cross-references.
Observe the warnings and safety instructions there!
1. Level the truck crane with the level adjustment system and lower it as
far as possible;
à p. 5 - 64.
2. Switch off (lock) the suspension.
The symbol (1) must be red (suspension off);
à p. 5 - 18.
3. Extend all outrigger beams to the required span;
à Permissible outrigger spans, p. 12 - 30,
à Setting the outrigger spans, p. 12 - 32,
à Extending/retracting outrigger beams, p. 12 - 35.
4. Move the outrigger pads into the working position and secure them;
à p. 12 - 39.
s
G
Danger of crushing from extending outrigger beams!
You may only activate the outriggers if you yourself or a banksman with
whom you are in visual contact have an unobstructed view of their move-
ments.
To Next Page
Loading...
