Crane operation
11.4 Settings and displays for crane operation
11 - 110 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
11.4.9 Warning submenu
ECOS differentiates between warning messages and error messages (error
messages;
à p. 11 - 114). A warning message indicates that certain values
do not correspond to a target value.
In the event of a warning message, the follow-
ing lamps will flash:
– the lamps (1) and
– the lamp (2) for
superstructure warning or
– the lamp (3) for
carrier warning.
For more information
• Press button (4) or (5) next to the flashing
lamp once – the corresponding
Warning
submenu will be opened.
The warning message is acknowledged –
lamp (2) or (3) lights up (will no longer flash).
Meaning of
the symbols
The colour of the symbols indicates whether a warning message is active in
the corresponding area.
– Symbol is grey – no warning message.
– Symbol red or yellow – warning message.
If a symbol is displayed in red or yellow,
perform the following checks.
H
This section deals with the symbols in the Superstructure and Carrier warning
submenus. Symbols which are present in both submenus are only
explained once. Follow the cross-references for continued procedures in
part 1 or part 2, depending on the submenu opened.
To Next Page
Loading...
