Starting/switching off the engine – for crane operation
10.1 Starting the engine – from the crane cab
10 - 2 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
4. Switch on the battery master switch; à p. 10 - 7.
5. Remove the hand-held control and insert all bridging plugs;
à p. 10 - 8.
6. Check the oil level in the engine;
à Maintenance Manual.
7. Switch on the ignition and check the instruments and displays;
à p. 10 - 8.
8. Adjust the brightness of the
ECOS display as required; à p. 10 - 11.
To Next Page
Loading...
