Driving modes
6.7 Rigging the auxiliary hoist
6 - 100 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Separating the
connection
Lowering the lifting frame
• Press the buttons (3) and (4).
• Press the buttons (2) until the locking
points (1) are relieved.
Retracting the locking cylinders
• Open the safety valve (3) – lever parallel with
the line.
• Press the buttons (2) until the locking
cylinders (1) are fully retracted.
Lowering the auxiliary hoist
• Press the buttons (2) until the auxiliary
hoist (1) is completely lowered.
To Next Page
Loading...
