Overview
1.10 Identification
Operating Manual GMK6300L 3 112 xxx en 1 - 35
xx.xx.xxxx
The following plates and numbers are attached to the truck crane for
identification purposes:
The location of the identification numbers on removable rigging parts
(e.g. counterweights, lattice extension) is described in the corresponding
chapters or in the relevant operating manual provided.
1 Serial number and crane type
2 The CE mark, only with truck cranes that are delivered to member
countries of the EU.
3 The serial number of the driver's cab
4 The chassis number and crane type
5 The chassis number in front of the first axle line in the frame.
To Next Page
Loading...
