Rigging work
12.9 Other rigging work
12 - 120 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Turning the moni-
tor on/off and
switching
To switch on:
• Switch on the ignition.
• If necessary, press the button (2) once.
The lamp (1) lights up. The image appears
on the monitor after a few seconds. If an
image does not appear;
à p. 14 - 16.
Switching off
• Press the button (2) once.
The lamp (1) and the image go out.
Switching
• Alternate between the cameras using
button (3).
To Next Page
Loading...
